How should wooden jewelry packaging box be desiccation handling?

1602

Published by
Jimmy at
November 17, 2017

Wooden jewelry packaging box is relatively long compared to other jewelry boxes. But the wooden jewelry packing box in the wet condition, but will greatly affect its longevity, so how to do the wood jewelry packing box?

1. Artificial drying: seal the wood in the steam drying chamber, and steam to promote water evaporation, drying the wood. (depending on the size and thickness of the wood, such as the 4cm sheet drying time generally takes a week), the degree of drying can make the wood water content only 3%. However, the brittle and brittle wood after high temperature evaporation is vulnerable to damage and is not conducive to engraving. Generally speaking, the degree of dry wood should be kept at about 30 %.

2, natural drying: place the wood classification ventilated place (plate, before or log), put into the crib, the bottom of the pile from the ground up to 60 cm, middle leave gaps, make the air circulation, take away moisture, wood drying gradually. Natural dryness usually takes years or months to reach a certain dry requirement.

3. Simple artificial drying: one is to dry wood internal water with fire. The second is to boil the resin in the wood and then dry or dry in the air. The drying time of these two methods may be shortened, but the wood after the water is easy to discolored, which is harmful to the wood.

Related article recommendations:

How to make your wooden jewelry box more longevity

The jewelry box can't be maintained this way, or it will be wasted

How to let the jewelry box moisture-proof, anti-mildew

Save

Latest posts